pendik escort kartal escort gebze escort goztepe escort paykwik bozum turk porno porno turk porno
Masör adam ayaklarından başlayarak kendisini okşayarak sikiş izle devam ettiğinde zevke gelen kumral kız kendisine sikiş yapmasını istedi Genç kız bacakları ayırıp genç adamın kafasını bacakları mobil sikiş arasına aldı Çok çalışkan olmayan asalak gibi yaşayan kızının sikiş daha iyi ders çalışarak geleceğe yönelik bir adım atmasını türk porno isteyen yaşlı anne kızının okuluna gelip sınıf arkadaşları sikiş içindeki en uyumlu olana rica eder ve kendilerine gelip kızıyla porno resim beraber ders çalışmasını rica eder Derslerini daha iyi çalışmaları sikiş izle için önce onların yanında oturup yemek yediren kadın daha sonra mobil porno yanların ayrılınca kaşar kızının aklının derste olmadığını sikiş izle görür Çok asi olan kızı sınıf arkadaşının sikini elleyerek öper

This email address is being protected from spambots. You need JavaScript enabled to view it. | 08458 - 222000

EAMCET| ICET| ECET| CODE: BVRI| PGECET| CODE: BVRI1

Welcome to BVRITN

ECE-Workshops

Department of ECE, B V Raju Institute of Technology, Narsapur has conducted 5-Day Workshop on “Advanced Digital Design using Verilog HDL” in association with LUCID VLSI Technologies, Hyderabad from 17th to 20th and 22nd December 2018.

Venue:

CVD Lab, Dept of ECE, BVRITN

OBJECTIVE OF THE WORKSHOP:

To Enhance Student Skills in designing Digital Circuits and modeling them by using Verilog HDL.

PARTICIPANTS

Total 44 Students from II B.Tech ECE (40) and III B.Tech ECE (4) have participated in this workshop.

RESOURCE PERSONS:

Mr.Raja Bandi, Director, LUCID VLSI, Hyderabad.

FACULTY ATTENDED:

Mr. I.B.K Raju, Assoc. Prof, ECE
Mr.U.Gnaneshwara Chary, Asst. Prof, ECE
Mr.K.Madhava Rao, Asst. Prof, ECE
Mr.K.Ananda Kumar, Asst. Prof, ECE
Mr.C.Ramesh Kumar Reddy, Asst. Prof, ECE
Mr.J.Yeshwanth Reddy, Asst. Prof, ECE
Mrs S.Venkata Laxmi, Lab Assistant, ECE

DAY WISE SESSIONS CONDUCTED:

Day Topic
Day 1 Digital Fundamentals And Structural Coding in Verilog
Day 2 Large Sized Combinational Circuit Design
Day 3 Coding Sequential Elements
Day 4 Industry Challenges & Solutions
Day 5 Mini Project and Certification Exam

WORKSHOP OUTCOME:

Students were able to do RTL modeling of digital circuits.
Students gained practical experience by designing, modeling, implementing and verifying several Digital Circuits.
Students were able to do micro project on digital design.

Department of ECE, B V Raju Institute of Technology, Medak has conducted a 6 day workshop on “Basics of Lab VIEW and NI Multisim”from 30-11-2018 to 06-12-2018.

OBJECTIVE OF THE WORKSHOP:

Basic Programming using Lab VIEW tools and working hands on for real time applications.

PARTICIPANTS

36 B.Tech II year ECE students

RESOURCE PERSONS:

Mrs. Anusha, Assistant Professor, ECE
Mr.E Bharat Babu, Assistant Professor, ECE
Mr.Syed Munavvar Hussain, Assistant Professor, ECE
Mr.T P Kausalya Nandan, Assistant Professor, ECE
Mr.Shaik Shafi, Assistant Professor, ECE
Mr.K Rambabu, Assistant Professor, ECE
Ms.P Haritha, Assistant Professor, ECE
Mr.P Subramanyam Raju, Assistant Professor, ECE

DAY WISE SESSIONS CONDUCTED:

Day FN Session AN Session
Day 1 Introduction and Motivation Basics of LabVIEW - Data Types
Day 2 Loops Structures
Day 3 Shift Registers Arrays
Day 4 Strings Sub VI Creation
Day 5 NI Multisim NI Multisim
Day 6 Hands on practice Hands on practice

WORKSHOP OUTCOME:

From this workshop students are able to write some programs by their own using Lab View tools and verify the results using simulation
Students can implement their electronic circult analysis experiments using NI Multisim

Department of ECE, B V Raju Institute of Technology, Medak in association with CDAC, Hyderabad has conducted," A 15-Day Short Term Certified Course (STCC) on “Embedded Systems Design ” from 06-12-2018 to 19-12-2018.

Venue:

VISHNU INNOVATION LAB, DEPT of ECE, BVRIT

OBJECTIVE OF THE WORKSHOP:

Gain exposure to industry standard ARM Cortex-M3 Processor and KEIL IDE
Understanding the architecture of Industry based Microcontrollers and working Hands-on for Real- Time applications.
Programming in Embedded-C using Simulators & Microcontroller Hardware Platform for Engineering Applications.

WORKSHOP COORDINATION TEAM:

Dr.I.A.Pasha
Dr. M.C.Chinnaiah
Mr. R.Anirudh Reddy
Dr. Balaji
Mrs. Vandana.Ch
Mrs. Anisha

PARTICIPANTS

Total 33 III-B.Tech ECE students have participated in this workshop

RESOURCE PERSONS:

Mr. Gaurav Sharma, Corporate Trainee, CDAC Hyderabad.

DAY WISE SESSIONS CONDUCTED:

Day Topic
Day 1 Introduction to Embedded system / Processor Based System
Day 2 Introduction to Embedded - C Programming
Day 3 Introduction to ARM Processor
Day 4 Introduction to LPC1343 & Keil IDE
Day 5 Interfacing of LCD
Day 6 Programming GPIO pins using LED
Day 7 Interrupts & its Programming
Day 8 SYSTICK Timers
Day 9 Programming Timers & Counters
Day 10 Watch Dog Timer & its Programming
Day 11 Programming ADC
Day 12 UART Protocol & its Programming
Day 13 SPI Bus Protocol & its Programming
Day 14 I2C Protocol & its Programming
Day 15 Examinnations

WORKSHOP OUTCOME:

From this workshop students are able to write the some programs by their own using Embedded-c language and verify the results using software simulation and hardware boards.
From this students got total awareness on micro controllers and their working using the registers.
From this workshop we can expect more projects for Embedded Design Contests.
From this workshop students can be able to do their mini projects and main projects using Embedded tools.

Department of ECE, B V Raju Institute of Technology, Medak in association with CDAC, Hyderabad has conducted," A 15-Day Short Term Certified Course (STCC) on “Digital VLSI System Design” from 06-12-2018 to 19-12-2018.

OBJECTIVE OF THE WORKSHOP:

Understanding the Digital Design Concepts and working Hands-on for Real- Time applications
Developing of Verilog code for real time projects and Implementing on FPGA Boards

PARTICIPANTS

II Year II SEM B.Tech ECE VLSI Automation Students

RESOURCE PERSONS:

Mr. ABRAR, CDAC, Hyderabad

FACULTY ATTENDED:

Mr.Mudasar Basha, Asst. Prof, ECE
Mr.Kishore .V, Asst. Prof, ECE
Mr. Rama Rao, Asst. Prof, ECE
Mrs. G.Divya Vani Asst. Prof, ECE
Ms.P.Asha Rani, Asst. Prof, ECE
Ms.T.Keerthi, Asst. Prof, ECE

DAY WISE SESSIONS CONDUCTED:

Day Topic
Day 1 Introduction to ASIC and FPGA Design flow VIVADO tool and Zed board. Basic Verilog Concepts Gate level modeling
Day 2 Data Flow and Behavioral modelling
Day 3 Combinational circuit Design 1
Day 4 Combinational circuit Design 2
Day 5 Test Benches and their Realizations
Day 6 Sequential circuit Design 1
Day 7 Sequential circuit Design 2
Day 8 STA
Day 9 Design and Realizations of FSMs
Day 10 Design of FSM for practical applications
Day 11 Design and Realization of FSM with Data Path(FSMD) based digital circuits
Day 12 Design of UART Controller
Day 13 Design of PS/2 Keyboard Controller
Day 14 Design of Simple 32 bit microprocessor
Day 15 Theory and Lab Examinnations

WORKSHOP OUTCOME:

From this workshop students are able to write programs by their own using Verilog HDL language and verify the results using software simulation and Implementation with hardware boards.
Students gained knowledge on Digital Design
From this workshop students can be able to do their mini projects and main projects using VIVADO tools.

Department of ECE, B V Raju Institute of Technology, Medak in association with VI Solutions, Bangalore has conducted a 3 day workshop on “Basics and Applications of Lab VIEW”from 24-1-2018 to 27-1-2018.

OBJECTIVE OF THE WORKSHOP:

Basic Programming using Lab VIEW tools and working hands on for real time applications.

PARTICIPANTS

29 B.Tech II year ECE students

RESOURCE PERSONS:

Mr. Satish Reddy, Application Engineer, Vi Solutions, Bangalore

FACULTY ATTENDED:

Mrs. M. Anusha, Asst. Prof, ECE
Mr. J. Manikyam, Asst. Prof, BME
Ms. A. Sandhya, Asst. Prof, BME
Mr. P. Subramanyam Raju, Lab Assistant, ECE

DAY WISE SESSIONS CONDUCTED:

Day Topic
Day 1 Graphical system design using structures
Day 2 Graphical system design using Arrays and Clusters
Day 3 File IO's, Graphs and Charts, Real time examples

WORKSHOP OUTCOME:

From this workshop students are able to write some programs by their own using Lab View tools and verify the results using simulation

Department of ECE, B V Raju Institute of Technology, Medak in association with CDAC, Hyderabad has conducted," A 15-Day Short Term Certified Course (STCC) on Embedded Systems Design” from 21-11-2017 to 09-12-2017.

OBJECTIVE OF THE WORKSHOP:

Gain exposure to industry standard ARM Cortex-M3 Processor and KEIL IDE
Understanding the architecture of Industry based Microcontrollers and working Hands-on for Real- Time applications.
Programming in Embedded-C using Simulators & Microcontroller Hardware Platform for Engineering Applications.

PARTICIPANTS

36 B.Tech ECE and M.Tech Embedded Systems students

RESOURCE PERSONS:

Mr. P.SRIKANTH, CDAC, Hyderabad
Ms.RAMYA, CDAC, Hyderabad

FACULTY ATTENDED:

Mr.R.Anirudh Reddy, Asst. Prof, ECE
Mr.Y.Gopi Krishna, Asst. Prof, ECE
Ms. C.Anisha, Asst. Prof, ECE
Ms. R.Meena, Asst. Prof, ECE
Ms.K.Sai Prasanna, Asst. Prof, ECE

DAY WISE SESSIONS CONDUCTED:

Day Topic
Day 1 C-Programming Basics
Day 2 C-Programming and Embedded-C
  Introduction to Embedded Systems
Day 3 ARM Architecture
  LPC 1343 Controller Introduction and Keil µVision IDE introduction
Day 4 GPIO Programming and LED Interfacing
Day 5 Interrupt Programming
Day 6 Programming Hardware Timers
Day 7 SysTick Timer and Interrupt Generation
Day 8 Watch Dog Timer
Day 9 ADC Programming
Day 10 UART Protocol and polling concepts
Day 11 SPI Protocol
Day 12 I2C Protocol
Day 13 OS Introduction and Programming
Day 14 OS Programming
Day 15 Theory and lab exam

WORKSHOP OUTCOME:

From this workshop students are able to write some programs by their own using Embedded-C language and verify the results using software simulation and hardware boards.
From this students got total awareness on micro controllers and their working using registers.
From this workshop we can expect more projects for Embedded Design Contests.
From this workshop students can be able to do their mini projects and main projects using Embedded tools.

Department of ECE, B V Raju Institute of Technology, Medak in association with CDAC, Hyderabad has conducted, "A 15-Day Short Term Certified Course (STCC) on ”Digital System Design” from 20-11-2017 to 09-12-2017.

PARTICIPANTS

Student Participants 53
Resource Person 2
RESOURCE PERSONS:

Mr. Akrammuddin, C-DAC, Hyderabad
Mr.Vijay kumar, CDAC, Hyderabad

FACULTY ATTENDED:

Ms.P.ASHARANI
Ms.T.KEERTHI
Mr.CH.RAMA RAO

DAY WISE SESSIONS CONDUCTED:

Day Topic
Day 1 Introduction to FPGA design Flow, ViVADO tool and Zed Board
Day 2 Basics Verilog concept gate level Model
Day 3 Data Flow and behavioural Model.
Day 4 Design of Combination Logic Circuit (Mux, Demux, Decoder, Encoder).
Day 5 Design of code converter.
Day 6 Test bench for Combinational circuit.
Day 7 Design of Sequential circuit Flip flops Counter Shift register.
Day 8 RTL Coding Guidelines.
Day 9 Finite state machines (Mealy state Machines, Moore state machines)
Day 10 Design of Parking lot counter, ASM design
Day 11 FIFO design Round robin Arbiter
Day 12 UART Controller
Day 13 I2C protocol
Day 14 Ultrasonics sensor.
Day 15 Theory and Lab exam

Participants Information

Student Participants 49
Resource Person 1
Faculty Participants 3

Resource Person

  • Mr. Akrammuddin, C-DAC

Faculty Attended

  • Mr. Mudasar Basha, Assistant Professor,ECE
  • Mrs. K.Anusha, Assistant Professor, ECE
  • Ms. Asharani, Assistant Professor, ECE

Topics Covered

  • Introduction to ASIC and FPGA
  • Introduction to Verilog.
  • Data types in verilog.
  • Operators in verilog.
  • Conditional loops in verilog.
  • Programming with examples
  • Functional verification with examples.
  • Creation of Constraint file

Department of ECE, B V Raju Institute of Technology, Medak in association with National Institute of Technology, Warangal (NITW) has conducted a one week Faculty Development Program under Electronics & ICT Academy, MeitY, Govt. Of India, on “Role Of Antennas in Software Defined Radio and Military Wireless Applications” from 27th April-2nd May 2017.

Participants Information

Participants 32
Speakers 9
Female Participants 8
male Participants 24
Participants from SC/ST Category 18
Research Scholars 1

List of Speakers

  • Dr. D. R. Jahagirdhar, Scientist ‘F’, RCI, DRDO, Hyderabad
  • Prof. N.V.S.N. Sarma, Professor, NIT Warangal
  • Mr. Sumith S. Pillai, Application Engineer, Design Tech Systems Ltd
  • Mr. D. Ratan Sanjay, Scientist ‘E’, RCI, DRDO, Hyderabad
  • Mr. K. Pavan Kumar, Technical Manager, Synergy Measurements Ltd.
  • Dr. Prashant K. Mishra, Scientist ‘E’, RCI, DRDO, Hyderabad
  • Dr. D. Vakula, Assistant Professor, NIT Warangal
  • Dr. L. Anjaneyulu, Associate Professor, NIT Warangal
  • Mr. K. Kaviarasu, Application Engineer, Entuple Technologies, Bangalore

Hands on Laboratory Sessions of Software tools

  • FEKO
  • HFSS

Program Coordinators

  • Prof. N.V.S.N.Sarma, Professor, Dept of ECE, NIT Warangal
  • Dr. B. R. Sanjeeva Reddy, Professor, Dept of ECE, BVRIT, Medak

Topics Covered

  • Antenna Radiation, parameters
  • Introduction to SDR and Antennas for SDR
  • Design of antennas for hand held devices
  • HF Antennas for broad band
  • VHF Antennas for broadband
  • Antenna Measurements
  • Antenna array design
  • Patch Antennas
  • CPW based antenna Design
  • Wideband and Multiband and UWB Antennas
  • Antenna miniaturization techniques
  • Fractal antennas
  • Metamaterials for antennas
  • Recent advances in Antennas

Feedback summary

  • Resource persons are the major strength of the programme.
  • All the topics were explained clearly to the participants.
  • Program coordination was excellent.
  • Latest research trends were covered in the FDP.

Suggestions from Participants

  • More lab sessions should be included.
  • Industrial visits should be included in the FDP to gain more practical knowledge

Participants Information

  • Total 35 II & III year students of ECE, CSE and IT had participated in this workshop

Resource Person

  • Mr. Amol Kulkarni, Senior Architect- Persistent Systems
  • Mr. Miland, Persistent Systems

OBJECTIVE OF THE WORKSHOP

  • Gain exposure to Internet of Things using Raspberry Pi module.
  • Understanding the Bluemix Platform developed by IBM.
  • Hands on experience on Raspberry Pi and Watson IoT platform.
  • To conduct Hackathon

Faculty Attended

  • T.P.K.Nandan
  • R.Anirudh Reddy
  • Dr. Syed Abudhagir
  • Dr.Balaji
  • T.Vasu Dev Reddy
  • Y.Gopi Krishna
  • CH.Gopi
  • R.Ashok
  • C.Anisha
  • R.Meena
  • K.Sai prasanna

Topics Covered

  • Introduction to Internet of things
  • Bluemix
  • Node Red
  • Watson IoT platform.
  • Day 2: Hackathon

Workshop Outcome

  • Students actively participated in hackathon
  • Got to know what is Internet of Things, its importance and its usage in real world application
  • Able to implement their own ideas using IoT and Raspberry Pi module.